Water supply stations. Choosing a pumping station for use in a private home? The best pumping stations for home and garden in terms of price-quality ratio
Article outline
Before choosing a pumping station, you should take into account several mandatory conditions in which the installation will operate. Based on these criteria, equipment is selected that can provide a reliable water supply.
The main characteristics of the pumping station are the following parameters:
- Electric motor power;
- Station performance;
- Maximum storage capacity;
- The height to which the station can raise water.
At the same time, do not forget that the manufacturer indicates the maximum capabilities of the pumping station, which will in no way coincide with the parameters required in reality. For example, in the equipment passport there is a figure - 3 cubic meters of water per hour. This characteristic regulates the maximum volume of pumped water, but when these values are reached, there will be no pressure. Or an indicator such as a maximum pressure of 40 meters implies that the water source is at the level of the pumping station, and the water flow is not provided for at all. In such conditions, the pump will produce the specified pressure, but will be absolutely useless.
To obtain more accurate data on the dependence of flow on pressure at the head of the pumping station, use the tabular and graphical data that is in the equipment passport. Usually the manufacturer does not hide the true characteristics of the pump, leaving the right of choice to the consumer.
TOP 5 pumping stations for summer cottages
As a rule, in a dacha, water consumption is determined not only by its consumption in the kitchen or shower, but also by watering the plants. In some cases, water is drawn from sources that may contain a certain amount of impurities in the form of sand or other suspended matter, so it is best to provide for the installation of an additional filter at the inlet in advance.
1. NeoClima GP 600/20 N (Russia-China) - from 5600 rubles
Users of this equipment note the convenience and ease of operation of the station, designed for organizing water consumption in a summer cottage, where a small water pressure is sufficient. It copes with its “responsibilities” quite well, but on the condition that the consumption occurs for no more than two consumers. It is usually used to supply water from wells, which is important when it is impossible to equip a well.
The pressure part and the working chamber are made of stainless steel, therefore, the risk of corrosion is eliminated and the pumped water can be used for any need, including recharging the washing machine and for cooking. It is necessary to install a check valve to prevent pressure drop in the network due to reverse flow. The pump power is only 600 W. Such low consumption allows the station to be used in dacha cooperatives where there are regulations on the use of electricity or in dachas with low permitted power. Of course, there are also minor drawbacks that can be attributed to the design features of the model - a short power cord and a thin hose between the pump and the hydraulic tank.
Name of parameters | Values | Note |
---|---|---|
Type | Used to supply water from wells and wells. | |
Immersion depth | 8 meters | The connection to the suction pipe is made with an incompressible spiral hose or plastic pipe. |
Maximum water pressure | 35 meters | Reliable water intake (operating point) is in the range of 20-25 meters. |
3 m³/hour | Under real conditions, the operating point is in the range of 1-1.5 m³/hour. | |
Hydraulic tank volume | 20 liters | The pump turns on quite often, but the safety margin ensures that the station operates for a long time without breakdowns. |
2. Quattro Elementi Automatico 801 - from 6,000 rubles
A household pumping station made in China is characterized by low cost and long service life. The kit does not include a suction filter and a check valve, but they are on sale from this manufacturer, which indicates an attentive attitude to customers on the part of the company. This station can be considered the “workhorse” of summer residents. Even with intensive use in extreme conditions, the equipment easily withstands and exceeds the five-year period.
All buyers who operate a pumping station agree that after minor modifications (installation of a filter, valve and additional hydraulic accumulator) this is an ideal device.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Used to supply water from wells and wells, there is an additional function for increasing pressure |
Immersion depth | 8 meters | If the water surface is higher, then it is possible to increase the distance from the station to the consumer |
Maximum water pressure | 40 meters | Reliable water intake (operating point) is in the range of 25-30 meters. |
Maximum performance | 3.2 m³/hour | Under real conditions, the operating point is in the range of 1.5-2 m³/hour. |
Hydraulic tank volume | 20 liters | In case of frequent power outages, it is recommended to install an additional hydraulic accumulator of larger volume. |
3. AL-KO HWF 1000 - from 6200 rubles
The advantages of this pumping station include the presence of a coarse filter that cleans the water from sand, leaves and other contaminants, as well as a check valve that prevents pressure loss. A “dry running” system is provided, which prevents the pump from operating in the absence of liquid.
There are differing opinions on the hydraulic accumulator, which is made of polypropylene. On the one hand, users by default consider plastic to be fragile, especially at low temperatures. On the other hand, plastic parts made from modern materials provide all the necessary characteristics of the equipment.
4. GARDENA 3000/4 - from 9990 rubles
Good materials used, light and silent station. But there is a weak point - the plastic tee inside the pump. If the station is not used in winter and stored at subzero temperatures, then the water in the tee will rupture it. The fact is that it is difficult to drain water from it, which spoils the impression of using the station.
Disadvantages also include weak threads on the inlet and outlet pipes for connecting the hoses. Overall a reliable station when used correctly. The buyer will have to carefully study the attached documentation, since there is no dry-running protection on the station, and disassembling the connections to clean the fine filter can take a lot of time.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | There is a cleaning filter available to supply clean water to the consumer. |
Immersion depth | 8 meters | Designed for pumping water from wells and boreholes. If the filter is clogged, a significant loss of pressure can occur. |
Maximum water pressure | 40 meters | Reliable water intake (operating point) is in the range of 20-25 meters, enough to supply water to two consumers at the same time. |
Maximum performance | 2.8 m³/hour | Under real conditions, the operating point is in the range of 1.5-2 m³/hour. The water temperature should not be higher than +35°C. |
Hydraulic tank volume | 24 liters | Material metal. 24 liters is enough to supply water during a short power outage. |
5. GILEX Jumbo 60/35 Ch-24 - from 8500 rubles
Reviews from the owners of this pumping station come down to 4 points. Not only the reliability of operation of the equipment is noted, but also its relatively low price with good characteristics.
The main disadvantage of the station can be considered the difficulty of putting the unit into operation. If the adjustment is incorrect, which is described very sparingly in the passport, the station operates unstable, and the initial start-up requires you to determine the necessary parameters yourself. The equipment is very sensitive to water hammer; if you close the tap suddenly, the plastic parts of the pump may be damaged.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Currently, the construction markets have all the required spare parts and consumables for pumping stations of this type. |
Immersion depth | 9 meters | This refers to the distance to the water surface; if you immerse the hose deeper, you may lose performance accordingly. |
Maximum water pressure | 30 meters | Reliable water intake (operating point) is in the range of 18-20 meters. |
Maximum performance | 3.3 m³/hour | Under real conditions, the operating point is in the range of 2-2.5 m³/hour. The water temperature should not be higher than +50°C. Pumps only clean water; installation of additional filters is required. |
Hydraulic tank volume | 24 liters | Material metal. Operate the equipment only at positive temperatures. It is not allowed to put into operation even at zero ambient air values. UNIPUMP AUTO DP 750 – from 13,081 rubles. |
6. UNIPUMP AUTO DP 750 – from RUB 13,081.
All components for Unipump pumping stations are supplied from certified factories in China, where components for Grundfos pumps are also produced. Assembly is carried out in Russia. This is how systems from the Auto DP series were born, presented in two modifications: with a 24 and 50 liter hydraulic accumulator.
The basis of the unit is a centrifugal surface pump with an external ejector. Thanks to the latter, the suction height is increased to 20 m instead of the standard 8 m for most similar models. The system is suitable for supplying drinking water from a well with a diameter of 100 mm or more, as well as wells. Provides automatic maintenance of normal water pressure in the water supply system.
Important! The pumped liquid should not contain particles larger than 1 mm, the total content of solid impurities is limited to 100 g per m³. Failure to comply with these requirements results in premature wear of the working units of the equipment. Install mud filters if your water does not meet these requirements.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Included: station assembly, external ejector, check valve with mesh, manual. |
Immersion depth | 20 m | For supplying water from sand wells and deep wells. |
Maximum water pressure | 40 m | With a suction height of 15 m. |
Maximum performance | 2.4 m³/h | Average productivity is 1.2 m³/h with a suction height of 15 and 20 m and a pressure of 20 and 16 m, respectively. |
Hydraulic tank volume | 24 l | A modification with a 50-liter tank costs 2.5 thousand rubles. more. |
TOP 5 pumping stations for country houses
If you want to use a pumping station in a country house for permanent residence, then you should choose completely different equipment, which will invariably affect the price offered by the manufacturer.
7. GILEKS Water cannon PROF 55/90 House - from 25,000 rubles
A relatively inexpensive product from a Chinese manufacturer. Easy to connect and install. The station comes with everything you need. The filter elements are located in the flask and can be replaced without problems. The pump is already equipped with a check valve and is protected from “dry running” by automation. The controls are simple; the program allows you to save factory settings, which are sufficient for the initial period of getting to know the station.
The disadvantages of the equipment include the station’s not very long service life (3-4 years of intensive use), apparently this is due to the use of plastic parts in some components.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | The kit includes a flask with filters. Filtered particle size from 1.5 mm |
Immersion depth | 30 meters | The station is designed to supply water from wells and, according to statistics, the depth of water is less than the specified characteristic. |
Maximum water pressure | 90 meters | Confident water intake (operating point) is in the range of 70-75 meters. |
Maximum performance | 3.3 m³/hour | Under real conditions, the operating point is in the range of 2-2.5 m³/hour. The water temperature should not be higher than +35°C. There is protection against pump overheating |
Hydraulic tank volume | 24 liters | Material metal. In addition to the hydraulic accumulator, the kit includes a control panel and shut-off valves necessary for connection. |
8. VMtec Altera Auto 5/5 - from 27,000 rubles
Consistently high German quality, adapted to Russian realities. Those users who have been using this device for several years note its high performance with the absolute reliability of all components of the station.
If “dry running” protection is also installed in simpler models, then automation, which regulates the operation of the pump depending on the water flow, is a privilege of more expensive models.
Almost all control of the station is carried out automatically and you only have to use the benefits that the equipment provides.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | With control unit basic characteristics |
Immersion depth | 30 meters | Pumps only clean water; installed filters allow you to “cut off” particles from 2 mm with a sand concentration in water of 50 g/m³ |
Maximum water pressure | 58 meters | Confident water intake (operating point) is in the range of 42 meters. |
Maximum performance | 8 m³/hour | Under real conditions, the operating point is in the range of 4.5-5 m³/hour. Minimum water temperature +15°C |
Hydraulic tank volume | — | Works without a hydraulic tank, is an alternative to old systems with an expansion tank |
9. Wilo HMP 603 1 - from 29,000 rubles
The high cost of the equipment, according to users, is justified only by the reliability of the pumping station. In fact, it turns out that its normal operation will be ensured only by purchasing protection against “dry running”.
If you do not ensure constant pressure at the pump inlet, the automation will not be able to “understand” that there is no water. Otherwise, the station is an example of equipment for a country house. It is reliably protected from pressure surges, and the membrane tank compensates for hydraulic shocks that are possible when pumping water and several disassemblies.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | All parts that come into contact with water are made of food grade stainless steel. |
Immersion depth | 30 meters | Pumps only clean water, requires installing a filter at the inlet |
Maximum water pressure | 32 meters | Reliable water intake (operating point) is in the range of 25 meters. |
Maximum performance | 8.1 m³/hour | Under real conditions, the operating point is in the range of 6 m³/h. Maximum water temperature +40°C |
Hydraulic tank volume | 50 liters | Serves as a good compensation system for possible water hammer. |
10. VMtec Altera Auto 9/4 - from 29,800 rubles
The little-promoted brand of the German company in Russia has characteristics that for the most part belong to more expensive models. And since our users are suspicious of low prices for premium equipment, this provides food for various rumors. For example, some potential buyers refer to some news that the company is buying cheap equipment in China and simply changing the labeling.
It is no secret that many companies locate their production in China, thereby reducing the cost of the final product. And this move is also used in this pumping station. For quite reasonable money you get high quality, reliable operation of the equipment within the parameters specified by the manufacturer and the ability to automatically control the pump.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Franklin Electric motor, Presscontrol Time control unit |
Immersion depth | 30 meters | The station is designed for pumping clean water. To maintain characteristics, it is necessary to install a coarse filter to prevent large particles from entering the equipment, and a fine filter to obtain high quality water. |
Maximum water pressure | 48 meters | Confident water intake (operating point) is in the range of 38 meters. |
Maximum performance | 15 m³/hour | Under real conditions, the operating point is in the range of 11-13 m³/hour. There are no water temperature requirements. |
Hydraulic tank volume | — | The tank is missing. A station is used to create networks instead of systems with an expansion tank. |
11. Grundfos CMB-SP SET 3-47 (PM 1-22) - from 29,500 rubles
Self-priming pumping station with an automatic control system, which ensures that the pump starts when drawing water and stops the engine when the water flow stops. The automation program provides protection against dry running and cycling. Owners of the equipment note the extreme simplicity of controlling the station; it begins to work in the required modes immediately after installation at the site of operation.
The main “complaints” of users relate to the high cost of the stations, which, however, is compensated by the absolute reliability of the equipment and its maintainability.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Low noise level, which is only 22 dB |
Immersion depth | 8 meters | There is automatic water level control |
Maximum water pressure | 34.9 meters | Confident water intake (operating point) is in the range of 28-30 meters. |
Maximum performance | 3 m³/hour | Under real conditions, the operating point is in the range of 1.5-2 m³/hour. Permissible water temperature up to + 60°C |
Hydraulic tank volume | — | The tank is missing. |
TOP 5 pumping stations for private houses
To ensure continuous water supply in country houses with high water consumption and maintaining the quality of supply, pumping stations with improved characteristics are used. Of course, their price range reaches several tens of rubles, but the benefits obtained fully compensate for the money spent.
12. ESPA Aquabox 350 TP 15 4 M - from 80,400 rubles
Forget about uneven water supply - this is how users comment on the launch of a new pumping station model on the market. The constant pressure provided by the pump design and automation creates truly increased comfort. In addition to supplying water to a country house, this model is capable of providing watering of plants in specified modes, while control over the parameters is provided by smart automation.
If an emergency shutdown of the pump occurs, caused by a lack of water in the well, an extreme drop in liquid, or air entering the system, the station will restart after a set period of time. In addition, you can set the time parameters for turning on the station in your absence and be sure that it will fully complete the task assigned to it.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Vertical installation |
Immersion depth | 8 meters | |
Maximum water pressure | 42 meters | |
Maximum performance | 3.6 m³/hour | Under real conditions, the operating point is in the range of 2.5 m³/h. Permissible water temperature from +10°C to + 35°C |
Hydraulic tank volume | — | The tank is missing. Float automatic water level mechanism |
13. ESPA ACUAPLUS 5M N - from 60,000 rubles
A pumping station designed to supply several water consumers simultaneously in a country house. Some potential users of pumping stations recommend using a simpler solution - to assemble a similar installation from cheap equipment. For example, use the “Malysh” submersible pump and install German automation.
But, according to reviews from owners, such a solution does not live up to the original implementation in a number of required points. Firstly, the ESPA ACUAPLUS 5M N station provides uniform pressure regardless of the number of consumers. Secondly, it is sensitive to all changes in the environment. And thirdly, it has several degrees of protection.
Name of parameters | Values | Note |
---|---|---|
Type | Submersible pumping station | A pump is immersed in a well or well, and all automation is located in the room. Quiet in operation |
Immersion depth | 20 meters | Fully automated |
Maximum water pressure | 40 meters | Reliable water intake (operating point) is in the range of 30-35 meters. |
Maximum performance | 3 m³/hour | |
Hydraulic tank volume | — | No tank |
14. Grundfos CMB 3-46 - from 58,000 rubles
Pumping station with professional parameters and excellent performance. It is difficult to find faults with this equipment, which comes with a fully automated water supply system. Stainless steel used in all parts that come into contact with water and automatic modes that ensure stable water pressure even when disassembling several consumers at the same time
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | |
Immersion depth | 15 meters | Fully automated |
Maximum water pressure | 35 meters | Confident water intake (operating point) is in the range of 22-25 meters. |
Maximum performance | 3 m³/hour | Under real conditions, the operating point is in the range of 1.8-2 m³/hour. Permissible water temperature up to + 35°C |
Hydraulic tank volume | 60 liters | Stainless steel |
15. Grundfos CMBE 1-75 - from 90,000 rubles
Despite the high cost of the equipment, the station has some operating features that directly affect the reliability of some parts. So, when connected to a reverse osmosis system, the pump turns on very often, approximately 27-30 times per hour, and the motor winding overheats. Therefore, it is better not to use such water purification in a country house.
Also, due to frequent starts, the nut on the shaft may spontaneously unscrew, which leads to displacement of the impellers. The first sign of such a malfunction will be a decrease in the nominal pressure in the network.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Supplied with preset values, which allows the equipment to be used immediately after installation on site. |
Immersion depth | 15 meters | Fully automated |
Maximum water pressure | 44 meters | Confident water intake (operating point) is in the range of 35-38 meters. |
Maximum performance | 2 m³/hour | Under real conditions, the operating point is in the range of 1.2-1.5 m³/hour. Permissible water temperature up to + 35°C |
Hydraulic tank volume | — | Without hydraulic tank |
16. Espa Tecnoplus 25 4M - from 75,000 rubles
A pumping station with extremely conflicting reviews. Those users who speak negatively about the characteristics of the equipment believe that the reason is poor assembly and an attempt by manufacturers to make the model as cheap as possible.
Thus, complaints are caused by the pump’s electric motor with poor protection against water ingress and low-quality bearings. In addition, it is noted that the pump stops in a three-stage mode with a decrease in the pump rotation speed. The shutdown is accompanied by a “sound accompaniment”, which causes irritation every time the tap is closed.
Otherwise, the equipment is quite reliable, provides constant pressure in the network, but it is very difficult to drain the water from the station during winter storage; a heated room is required.
Name of parameters | Values | Note |
---|---|---|
Type | Surface pumping station | Supplied with preset values, which allows the equipment to be used immediately after installation on site. |
Immersion depth | 15 meters | Fully automated |
Maximum water pressure | 40 meters | Confident water intake (operating point) is in the range of 32-35 meters. |
Maximum performance | 7.2 m³/hour | Under real conditions, the operating point is in the range of 6-6.5 m³/hour. Permissible water temperature up to + 35°C |
Hydraulic tank volume | — | No hydraulic tank, only a small compensator to protect against water hammer |
Editor's Choice
The choice of equipment depends entirely on the water consumption system being created and its operating conditions. For small houses and irrigation, inexpensive models are used that provide an initial level of water consumption. To create reliable water supply systems for year-round living in a country house, it is better to purchase automatic stations that can maintain a constant water pressure according to the established parameters in automatic mode.
If we take into account the initial price category of the equipment, we recommend the station. Good characteristics and reliability of all components allow you to create a stable water supply system at your summer cottage.
For a country house or cottage, if you need to use several points of water consumption at once, it is best to purchase a pumping station from the middle price segment. This equipment, which has the characteristics of premium stations, is offered at a very modest price.
Well, from the premium class pumping stations presented, we recommend stable water pressure in the network and almost complete automatic control of pump parameters.
For a private home it will save the situation. The distribution of pipes to plumbing fixtures in the house and the raising of water from the depths are combined into one system. This ensures constant pressure in the system. If the pump simply pumps water from a well into a container, then the pumping station is a system in which the operation of the mechanism is controlled by automation, maintaining the flow and pressure in the water supply.
Pumping station equipment and operating principle
The photo shows the equipment and connection diagram of a pumping station for a private house. The kit includes:
- pump:
- storage tank or pressure tank;
- pressure gauge;
- pressure switch;
- control automation.
The equipment is selected taking into account the maximum disassembly of all cranes and peak load. You need to know that the parameters, pressure and performance of the pump are interdependent. The presence of automation simplifies the maintenance of the water supply system. A pumping station for a private house is installed in a utility room or pit next to it. The circuit wiring is also done there.
Foreign-made pumping stations, depending on performance, cost $400-500.
The included pump is selected not only by power and pole lifting height, but also by design:
- A pump with a built-in ejector will lift water from 45 meters. Water is pushed into the battery due to the vacuum in the pipe. The pump operates noisily; it can be installed in a caisson or in a utility room.
- The pump with a remote ejector operates silently, since the unit is located on the suction line below. But such a pump can pump clean water, without suspension.
- A pump without an ejector is used to lift water from a depth of up to 10 meters. The devices operate silently and are inexpensive.
A water tank complete with a pump can be either a separate storage tank or a hydraulic accumulator. The storage tank is installed at a height to ensure stable pressure in the system. The level is adjusted by a float. Such a storage device is inexpensive, but the risk of flooding the room if the float malfunctions is high.
The hydraulic accumulator has a small volume and is controlled by a pressure sensor. The compact container does not require a special location.
A pumping station for a private house with a hydraulic accumulator is the best solution.
The operation of the station is controlled automatically. After the system starts, the pump turns on, water enters the accumulator and fills the system. When the required pressure in the pipelines is reached, the automation turns off the pump. The pressure in the water supply is maintained by an accumulator tank. The pressure in the tank is adjusted by the manufacturer in the range of 2-3 bar. The pressure in the line is controlled by a pressure gauge. This is the operating principle of the pumping station.
Selecting a pumping station
Manufacturers offer a wide range of equipment. Users do not always choose a station. So, for summer residents with seasonal residence, the pump is more suitable. It is impossible to create comfortable conditions in a rural house without a well-thought-out water supply system. How to choose a pumping station for a private home? It is necessary to determine the need for water and the depth of the aquifer, the distance from the well to the pumping station. You will need data from the well passport:
- depth of the mine well;
- mirror statistical level;
- dynamic water level.
Water flow from taps is determined at the rate of 4 l/min from the tap and 12 l/min for the shower. the productivity should not be much higher than the requirement. Greater productivity increases cost and energy consumption. In this case, there is a possibility of draining the well.
Statistics show that a family of 4 people requires a station with a capacity of up to 4 cubic meters. m per hour, with a pressure of 50 m. A 20 liter hydraulic accumulator will cope with the task. Household pumping systems have a power of 0.6 - 1.5 kW.
The installation of a pumping station in a private house must meet the following requirements:
- provide a capacity of 2-6 cubic meters. m/hour;
- the volume of the storage tank should provide a reserve in case of a power outage;
- protection against dry running is provided;
- have a convenient control method - automatic, manual or remote.
Manufacturers of pumping stations
All foreign pumping stations should be connected to network electricity only through a voltage stabilizer. Electrical equipment from European manufacturers is designed for power supply of 230 volts and stable parameters.
Users choose equipment from well-known manufacturers. The following installations are considered the best pumping stations for a private home:
- Italian Marina stations lift water from a depth of 25 m. They have a cast iron body and a reliable automatic control system. Installation power 1.1 kW, productivity 2.4 cubic meters. m/hour.
- Pedrollo stations are produced to suit various requests. Water lifting depth 9 - 30 m, productivity 2.4 - 9.6 cubic meters. m/hour. Batteries included with a capacity of 24-60 liters.
- Karcher pumping stations are the most popular and are considered the best for a private home. Steel hydraulic accumulators with a capacity of 18 -40 liters, automatic regulation, capacity 3.8 cubic meters. m/hour – all parameters are designed for a family of 4 people.
- The German company Wilo is the oldest manufacturer of pumping equipment. The equipment has a high degree of protection and reliability. The power of the stations is 0.55 - 1.6 kW, it is possible to choose a suitable model in a plastic or steel case.
- The Russian company "GILEX" produces pumping stations, but they are inferior in quality to foreign models. Their advantage is the ability to pump muddy water and adaptability to the characteristics of electrical networks. Assembling the station is difficult, spare parts are not always available.
When choosing a pumping station, you need to take into account that a metal body and a metal tank will last longer.
It is imperative to choose a manufacturer that supplies products from the brand’s homeland. Products manufactured in third countries do not have a manufacturer's warranty.
Correct installation of the station
How to install a pumping station in a private house? Further work without vibration and unnecessary noise depends on correct installation.
The installation is delivered to the market ready for connection. All systems are debugged. It remains to determine the installation location and equip it. A monolithic foundation is being created for the station. Communications are brought to the connection point. It is necessary to install a check valve at the pump suction so that the system is flooded. A filter is installed on the pipe to prevent pebbles from entering the impeller. The equipment must be installed using anchor bolts using vibration dampers.
The assembled installation is grounded. The suction pipeline is filled with water through a funnel. After turning on the station, check the tightness of all connections. It is better to install the system with the assistance of an experienced specialist. It is necessary to provide space heating in winter. If the equipment is installed in a pit or caisson, the temperature there will not drop below 0 degrees, but the lid should be insulated from above.
Choosing a pumping station for your home - video
Perhaps many gardeners, summer residents and owners of suburban areas are familiar with the problem of organizing irrigation and water supply in general. Not always dacha communities are equipped with a water supply system, and where there is one, the pressure is not good enough. It is for these reasons that special pumping stations have been developed.
Types of pumping stations
Pumping equipment for summer cottages comes in several modifications; which one to choose depends on the specific conditions in which the device will be operated.
- Surface water supply stations
- Submersible pumps for drawing water from wells
- Pumps for pumping water from wells
Any of these types is perfect for a summer residence. The use of advanced technologies makes it possible to integrate electronic control systems into equipment. Thanks to this, you can easily create an automated irrigation system in which there is no need for constant human intervention. It is worth noting that all country pumps are made from durable materials that are characterized by resistance to the destructive effects of the environment in which they operate.
Where to buy a pump for a garden
The main problem when choosing pumping equipment is the huge variety of types and modifications. In order not to make mistakes and make the right choice, it is best to contact a specialist. It will help you calculate which performance and power indicator is optimal for use in a particular area. If you decide to buy equipment from us, then you will receive competent advice, a reasonable price and delivery. We ship goods not only in Moscow, but throughout Russia.
Automation of country water supply will allow you to completely forget about the lack of benefits of civilization outside the city. To implement this idea, you need an inexpensive, productive pumping station that can easily do all the hard and, admittedly, thankless work for the owners. You don’t want to always carry water in buckets, do you?
We will tell you which pumping station for your dacha will be the best purchase. Let us list what criteria the buyer should be guided by. Here you will find a description of the design features and specifics of connecting the equipment.
An excellent addition to the information is the rating of water supply stations, compiled based on the personal experience of summer residents in choosing equipment. With the help of the information we provide, supported by photos and videos, you can easily solve the problem of purchasing a unit and arranging the system.
Indeed, is a pumping station really necessary at the dacha? Isn't it easier to buy a regular one, which does not require special maintenance and is cheaper?
This option is the most common, in particular in summer cottages where owners live only in the summer, but it is far from the most effective.
Image gallery